Go to basket

0 Items in Basket

Total: £0.00


1
2
3
4
5

17.4mm Surface Mounted Aluminium LED Profile (Extrusion)

Was £18.50

Special Price: £7.00

In stock

SKU: SLGSUR

Brand: SLG Lighting Ltd.

* Required Fields


  • Length = 0 watts

  • Length = 0 watts
  • Was £18.50

    Special Price: £7.00


    17.4mm Surface Mounted Aluminium LED Profile (Extrusion)

    Double click on above image to view full picture

    Zoom Out
    Zoom In

    More Views

    17.4mm Surface Mounted Aluminium LED Profile (Extrusion).


    Now Available in a 1m or a 2m long length, with the option to add an LED strip to the profile.


    Our surface mounted aluminium LED profile can be used to house any of our LED tapes. An LED Profile helps to keep our LED tape safe and out of the way, free from moisture and dust.


    We supply all of our extrusions in a 1m or 2m long length, which is easily cuttable using a hacksaw or other type of cutting equipment (therefore the price displayed is per metre). The LED Profile is supplied complete with a frosted cover for a stylish and professional finish.


    For customers who require longer lengths than 2m, you can simply butt them up to one another, up to the length you require. Installation is designed to be as simple as possible.


    The LED profile is very slim only 6mm deep, 17.4mm wide.


    Please note, the product does not include the LED Light shown in image below/above. This is sold separately.


    End Caps are also available to seal the ends once installed (product code SLGSUREND).

     

     

    Please note, you will also need an LED Driver to power the tape if you choose to add the LED strip, drivers required below :


    Up to 1m requires a 6 watt LED Driver (product code - SLG7WAMP6).

    Up to 2m requires a 15 watt LED Driver (product code - SLG15WAMP6).


    As we cut LED Tape from a 20m reel, it is excluded from our usual return policy, as it is personalised to your personal requirements. (Please refer to our terms and conditions for more information).

    Typical Uses


    Our LED Profiles are typically used as protection for LED Tape from moisture and dust, etc. however, they are increasingly becoming a design feature. Our Surface Mounted LED Profile is an attractive addition to any room and enhances your LED Tape, providing a high quality finish and presenting a constant strip of light beaming through the frosted cover of the LED Profile, shining straight up from it's surface mounted position.

     

    You may find our LED Profiles in the following places:

     

    Domestic:

     - Kitchens
     - Bathrooms
     - Living rooms
     - Dining rooms
     - Bedrooms
     - Stairways


    Commercial:

     - Restaurants
     - Retail units / shops
     - Cinemas
     - Supermarkets
     - Leisure Centres
     - Hotels
     - Offices
     - Hospitals
     - Museums

     

    If you are considering using our Surface Mounted LED Profile and would like to discuss your plans with one of Technical Advisors, please email [email protected] or call 0844 318 1118 and speak with one of the team.

    Key Benefits


    Key Benefits of our Surface Mounted LED Profile include:

     

     - Designed to sit well on surfaces like counter tops, etc.

     - Provides your LED Tape with protection and a safe home away from moisture and dust.

     - Gives a professional finish to your LED Tape.

     - Attractively designed, constructed of Aluminium with an anodised finish and featuring a frosted cover.

     - Supplied in 1 metre lengths but can butt up to other Surfaced Mounted LED Profiles seemlessly for longer lengths of LED Tape.

     - Allows you to angle light onto a display or worktop due to the corner angle.

     - Easily mounted using double sided adhesive tape, glue or screws.

     - Tape is easily fitted by using the Tapes 3M adhesive backing, simply peel and stick.

     - Slim design for discreet use.

     

    If you would like to discuss these benefits or if you have any questions about our Surface Mounted LED Profiles please email [email protected] or call 0844 318 1118 and speak with one of our team.

     

     

    Technical Information


    The technical information for our Surface Mounted LED Profile is detailed below

     

     - The body of the profile is constructed from aluminium.

     - The LED Profile has a frosted cover where the light is able to shine through.

     - The profile is supplied in 1 metre lengths as standard.

     - It is easy to cut the profile to shorter lengths using a hacksaw or other cutting equipment.

     - We can cut this for you if you specify your required length at the time of order.

     - The profile has a slim design with the following measurements - 15.2mm wide and 6mm deep.

     - End Caps (SLGSUREND) are available to seal the extrusion and can be added to your order during your 'package builder' process.

     

    If you require any further information relating to the technical specification of our Surface Mounted LED Profile or if you simply have a question to ask please contact us at [email protected] or call 0844 318 1118 and speak with one of our Technical Advisors.