Go to basket

0 Items in Basket

Total: £0.00


1
2
3
4
5

Wireless Remote & Receiver For Colour Changing LED Tape

Was £39.95

Special Price: £19.15

In stock

SKU: SLGRGB

Brand: SLG Lighting Ltd.


Wireless Remote & Receiver For Colour Changing LED Tape

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Wireless Remote & Receiver For Colour Changing LED Tape

Our simple remote control has a 15 metre wireless radio range & you can hide the receiver unit anywhere in the room. You do not need to point at the receiver to change the colour or programme.

It does 8 static colours, it will dim the brightness down on static colour. It also comes pre-programmed with 6 colour change programmes

Our remote control gives you excellent control over your lights, the maximum load for the receiver is 20m on our 30 led per metre strip and 10m on our 60 led per metre strip. In technical terms this is 144 watt.

For lengths above the maximum load you can use our RGB amplifier which will boost the signal. (Order Code SLGAMP)

Specification

  • Colour Options; Red, Green, Blue, White, Orange, Yellow, Cyan, Purple
  • Hold onto a single colour
  • Fully Dim the brightness of single colour
  • Auto Change, variable speed (You can control the speed)
  • Fade between colours, variable speed (You can control the speed)
  • Flash between colours, variable speed (You can control the speed)
  • Jump between colours, variable speed (You can control the speed)
  • Memory, It remembers the colour/setting you had switched on when you switch the power off and then back on.
  • Please note batteries not included with remote.
  • Battery needed for the remote is a 12V 27 AMP.

Typical Uses


Our Wireless RGB Remote Controller has been designed for use with our RGB Colour Changing LED Tape and so is typically found wherever our RGB Colour Changing LED Tape is used, whether in the office, at home, or in a restaurant or even at your local gym and this is because of its simple design and reliability.

You may find our Wireless RGB Remote Control where Single Colour LED Tape is in use, in the following places:

Domestic:

 - Living room
 - Dining room
 - Kitchen
 - Bathroom
 - Bedroom
 - Stairs
 - Hallways
 - Gardens


Commercial:

 - Restaurants
 - Retail units / shops
 - Cinemas
 - Supermarkets
 - Leisure Centres
 - Hotels
 - Offices
 - Hospitals 
 - Museums
 - Gyms
 - Bars / nightclubs


If you are considering using our Wireless RGB Remote Controller and would like to discuss your plans with one of Technical Advisors, please email [email protected].co.uk or call 03334432463 and speak with one of the team.

Key Features


Key Features of our Wireless RGB Remote Controller include:

 - The ability to fully dim a single colour on the RGB Colour Changing LED Tape
 - Managing the Tape's power on / off function
 - An ability to remember the dimmers last used setting / last colour selection before the device was turned off and defaulting to that level when next switched on
 - Simply designed white remote control for easy use 
 - The Remote Control and Receiver communicating wirelessly via radio frequency, meaning that the receiver does not have to be visible for maximum performance
 - Can control multiple controller as is same frequency on Static Colour, Dimming and on/off.

If you would like to discuss these benefits or if you have any questions about our Wireless RGB Remote Control, please email [email protected] or call 03334432463 and speak with one of our team.

 

 

Technical Information


The technical information for our Wireless RGB Remote Control is detailed below:

 - Input voltage - 12v - 24v DC
 - 144 watt maximum capacity:
     - 20 metres of 30 LED's per metre RGB Colour Changing Tape
     - 10 metres of 60 LED's per metre RGB Colour Changing Tape
 - 8 colour options including, red, green, blue, yellow, orange, white, cyan and purple
 - Option to hold onto a single colour
 - Colour: white  
 - Power on / off button
 - Dimming up and down buttons
 - Remote Control and Receiver communicate wirelessly using Radio Frequency
 - Device remembers the previous settings prior to switching off and reverts to those settings when powered on again 

If you require any further information relating to the technical specification of our Wireless RGB Remote Control, or if you simply have a question to ask please contact us at [email protected] or call 03334432463 and speak with one of our Technical Advisors.